3
Code Numbers
3.1
Introduction
With code numbers ...
... can be called.
3.2
Overview
Code number Brief Description
0
123
75368
79513
95148
531210
688379
807667
857282
LOGBOOK
NET123
SIK
VERSION
May 2006
Certain areas of the hard disk
Certain file types
Certain functions
DANGER
Code numbers may only be passed on and/or used by trained service technicians.
Inexpert handling may result in the loss of important data, in a faulty machine performance
and thus lead to damage or injury to property or persons.
Delete the soft keys MP EDIT, PLC EDIT, OSCI, etc.
Edit subset of machine parameters for the machine operator
Offset adjustment for analog axes, see page 1- 346
Info menu (U[BATT], U[ACCU], U[VCC], TEMP, T[CPU1], see page 1- 220
Call the active machine parameter list, see page 1- 468
Reset non-volatile PLC markers and words in the RAM
Integrated oscilloskop, see page 1- 49
Call the PLC area, see page 1- 241
Reset the operating times
Call and save the internal log of the TNC, see page 1- 35
Network settings for the single-processor control, see page 1- 247
Display of the number of the SIK system identification key and display of the
enabled options, see page 1- 414
Create the file TNC:\Version.a
System data is saved in this file for diagnostic purposes.
The file can be read out for diagnosis.
3 – 13