Power Supply Units - HEIDENHAIN iTNC 530 Service Manual

13.3 Power Supply Units

The iTNC 530 is supplied via connector X69 (X169) on the CC;
see "X69: NC power supply and control signals, see X169" on page 13 – 166.
Exception: An MC can be connected directly to a UV 106 (B), the CC is not required. This
constellation is intended for machines with analog axes and spindle(s).
The power supply units are, e.g., the UV 105, UV 105 B and UV 106, UV 106 B power supply
units.
Further information --> see "Power Supply" on page 14 – 205.
The UV, UVR power supply units and the UE, UR compact inverters also belong to the power
supply units.
For detailed information, refer to the Service Manual "Inverter Systems and Motors".
May 2006 13 – 173