HEIDENHAIN iTNC 530 Service Manual page 445

Loading the  In the Programming and Editing mode, press the MOD key
service pack

In the upper part of the window, set the cursor to the folder that contains the zip file
(e.g., 340490_001_SP1.zip) of the service pack.
 Press ENT. --> All ZIP files of available service packs are shown in the lower part of the
window.

Press the softkey FILES. --> The cursor changes to the lower part of the window.
 Select the latest service pack and press the softkey SELECT. --> The installation of the
service pack starts (the control also reboots).
 Finally, check the machine functions!
May 2006
 Press the softkey SP-->iTNC
A pop-up window is opened.
Note
With the +/- key you may open and close the directory trees.
27 – 445