Write Analog Output; Acyclic Reading - Siemens SIMOCODE pro Programming And Operating Manual

Description of the blocks
4.4 Block for MMMeas measured value function
Table 4- 68
Basic unit type
BU 1
SIMOCODE pro
PROFINET:
BU 3
4.4.4.3

Write analog output

The analog output can be written cyclically to the SIMOCODE pro device.
With the parameter
AMOutIn
(LiOp = TRUE)
If the interconnectable input is selected, the operator-controllable input is deactivated.
4.4.4.4

Acyclic reading

Reading the data record 94 is either triggered using the interconnectable input parameter
RdDataLi
The data that is read is normalized and sent to the output parameters.
If an error occurs, the values are set to zero and the output
160
Assignment of PZDInxx to the feedback from SIMOCODE pro
SIMOCODE pro
byte
4–5
6–7
8–9
10–11
12–13
14–15
16–17
18–19
, you can parameterize whether the operator-controllable input
LiOp
,
AM2OutIn (LiOp = FALSE)
.
, in the OS when selecting the faceplate, or by OS operation (
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Cyclic
send data
Values
parameterized in
SIMOCODE ES
–
or the interconnectable input
PZDInxx
PZDIn45
PZDIn67
PZDIn89
PZDIn10
PZDIn12
PZDIn14
PZDIn16
PZDIn18
, is used
AMOutLi AM2OutLi
RdDataOp = 1
is set.
RdErr = 1
SIMOCODE pro PCS 7 Library V9.0
).