Siemens SIMOCODE pro Programming And Operating Manual page 182

Description of the blocks
4.5 Block for statistical function MMStat
Note
The following parameters are enabled for SIMOCODE pro C (BU1) and S (BU0):
• Timer 1 and 2
• Counter 1 and 2
• No calculation module
The following parameters are enabled for SIMOCODE pro V (BU2):
• Timer 1 to 4
• Counter 1 to 4
• Calculation module output 1 and 2
The following parameters are enabled for SIMOCODE pro V PN (BU3):
• Timer 1 to 6
• Counter 1 to 6
• Calculation module output 1 to 4.
182
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
SIMOCODE pro PCS 7 Library V9.0