Siemens SIMOCODE pro Programming And Operating Manual page 232

Maintenance Station
5.1 Maintenance Station
Display
*) You can find detailed information on Signaling, Warning and Tripping described for
Dataset DS 92 – Device diagnostic in system manual of SIMOCODE pro PROFINET.
Messages
Messages for an incoming Signaling, Warning and Tripping event can be found using:
Tool
For WinCC
For PDM-Menu
For SIMOCODE ES-Menu
Further status information according to control and protection can be found:
Tool
For PDM-Menu
For SIMOCODE ES-Menu
232
Remark
Good
Message is locked
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Message
-
-
Dialog/Alarm logging
Alarm logging
or
at the faceplates diagnosis view of the device
Device > Faults/ Warnings/ Status Information - You will find
following tabs according to the event:
Faults
•
Warnings
•
Status Information
•
Target System > Faults/ Warnings/ Status Information - You
will find following tabs according to the event:
Faults
•
Warnings
•
Status Information
•
Dialog
Device > Control/ Status Information - Following group
boxes will display status information:
Control
•
• Protection
Target System > Control/ Status Information - Following
group boxes will display status information:
Control
•
Protection
•
Caused by
-
-
SIMOCODE pro PCS 7 Library V9.0