Technical Data - Siemens SIMOCODE pro Programming And Operating Manual

Technical Data

Table B- 1 Memory space requirements and called blocks per block type for SIMOCODE pro PCS 7 Library V9.0
Block No.
1 2
MMDiag FB1300
MMOprtn FB1301
MMMeas FB1302
MMStat FB1303
MMLog FB1304
MMRevDhl FB1305
The symbolic designator in the symbol table of the library for the respective function block (FB). It must be unique within
1
the project.
Consists of the type of block (FB) and the number.
2
Memory requirement of program code, once per block type
3
Memory requirement for an instance data block.
4
The memory required for the local data when the block is called in an execution level. This is limited according to the
5
specific CPU. If this amount is exceeded, you must check the setting in the CPU configuration and redistribute it among
the organization blocks based on the actual requirement.
The relevant driver block uses these blocks. They are now located in the user program. They are stored in the same
6
library.
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Length of Length of
block in the block in the
load work memory,
memory, in in bytes
3
bytes
3
8736 7368
21680 18286
18826 16362
6302 5090
19362 17192
26728 24234
Length of Length of
instance data instance data
in the load in the work
memory, in memory, in
bytes bytes
4 4
1602 468
3834 1424
2494 1050
1918 846
4036 2400
2734 920
B
Temporary Blocks
memory, in called
6
bytes
5
198 FC369,
SFC51,
SFC6,
SFC64
454 FC369,
SFC13,
SFC6,
SFC64,
SFC20
166 FC369,
SFC6,
SFC64,
SFC20
86 FC369,
SFC6,
SFC20
216 FC369,
SFC6,
SFC20
110 FC369,
SFC6,
SFC20
283