Siemens SIMOCODE pro Programming And Operating Manual page 224

Description of the blocks
4.7 MMRevDhl motor block
①
②
③
④
⑤
⑥
Icons for motor status
Status
Motor running forward
Motor running fast
forward
Motor fault
Reference
Interlocking (Page 209)
224
Buttons
for switching between modes
•
( ,
AutoModOp ManModOp
for starting and stopping the motor
•
( , ,
FwdMan FFwdMan RevMan
for resetting the trip (
•
The buttons open the expanded command area;
authorization level 5 and higher
Interlocks and Bypass conditions
Status of enable (
•
Permit
Protection (
•
Protect
Interlocking (
•
IntLock
Analog user-defined auxiliary values (
Button for switching to the standard view of a faceplate.
Display is only visible when the corresponding block input is connected.
Status display of the block, e.g. monitoring, maintenance, errors.
Motor status (see table)
⑦
Symbol
, , )
LocalOp OosOp
, ,
FRevMan StopMan
)
TrpRstOp
, )
Perm_En
, )
Prot_En
, )
Intl_En
)
UserAna1
Status
Motor running in re-
verse
Motor running in fast
reverse
Motor stops
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
)
Symbol
SIMOCODE pro PCS 7 Library V9.0