Siemens SIMOCODE pro Programming And Operating Manual page 157

AM – output
AM – input 1
AM – input 2
AM – input 3
TM – max. temperature
TM – temperature 1
TM – temperature 2
TM – temperature 3
EM – ground fault current
EM – last ground fault trip
current
"X" = Measured value is available, "–" = Measured value is not available.
Additional measured values for SIMOCODE pro PROFINET devices
The measured values depend on the expansion modules used (AM, TM).
Note
Unsupported values are read and displayed as zero.
Table 4- 63
Measured values
AM2 – output
AM2 – input 1
AM2 – input 2
AM2 – input 3
TM2 – max. temperature
TM2 – temperature 1
TM2 – temperature 2
TM2 – temperature 3
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
–
–
–
–
–
–
–
–
–
–
Additional Measured values for SIMOCODE pro PROFINET devices
SIMOCODE pro V
from E02
available on analog modules AM
available on temperature modules TM
4.4 Block for MMMeas measured value function
available on –
analog modules
AM
–
–
–
available on available on
temperature multifunction
modules TM modules MM or
temperature
modules TM
available on available on
ground fault multifunction
modules EM modules MM or
ground fault
modules EM
Description of the blocks
AMOut
AmOutE
AMIn1
AMIn1E
AMIn2
AMIn2E
AMIn3
AMIn3E
MaxTemp
TMTemp1
TMTemp2
TMTemp3
EFltCurr
ETrpCurr
Parameter
AM2Out
AM2OutE
AM2In1
AM2In1E
AM2In2
AM2In2E
AM2In3
AM2In3E
MaxTemp2
TM2Temp1
TM2Temp2
TM2Temp3
157