Maintenance Station - Siemens SIMOCODE pro Programming And Operating Manual

Maintenance Station

5.1 Maintenance Station
The SIMOCODE pro Library PCS 7 V9.0 supports the function of the Maintenance Station,
via GSD, via PDM object, and via OM SIMOCODE pro.
SIMOCODE pro PROFIBUS – Maintenance Station
Display
*) You can find the detailed information on Signaling, Warning and Tripping described for
Dataset DS 92 – Device diagnostic in system manual of SIMOCODE pro PROFIBUS.
230
Remark
Unknown/untested
Trip
Failure
Warning
Signaling
Good
Message is locked
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Message
-
Device [Subnet
No.]/[Address]: Bad,
maintenance alarm
Device [Subnet
No.]/[Address]: Failure
Device [Subnet
No.]/[Address]: Uncertain,
maintenance demanded
Device [Subnet
No.]/[Address]: Good,
maintenance required
-
-
5
Caused by
PLC in Standby
Tripping *)
General Fault
•
Controller Fault
•
Protection has tripped
•
Level monitoring low/high
•
Miscellaneous
•
Failure of PROFIBUS
connection or Rack Fault or
Module Fault
Warnings *)
Protection has tripped
•
Level monitoring low/high
•
Miscellaneous
•
Status signaling *)
Signaling by controller
•
Protection has tripped
•
Signaling caused by
•
parameterization
-
SIMOCODE pro PCS 7 Library V9.0