Siemens SIMOCODE pro Programming And Operating Manual page 226

Description of the blocks
4.7 MMRevDhl motor block
①
②
③
④
⑤
See also
Monitoring functions (Page 207)
226
Monitoring
Control and runtime in seconds, monitoring time (
Activation of monitoring (
Monitor
opens the expanded command area; authorization level 6 and higher
Service
Activation of simulation (
SimOn
Maintenance enable (
MS_RelOp
The buttons open the expanded command area;
authorization level 7 and higher
Button on faceplate MMMeas; visible if the input parameter
with an output parameter of MMMeas
Button on faceplate MMStat; visible if the input parameter
an output parameter of MMStat
Operator control enable
The operator may execute the command.
•
The operator cannot execute the command because the command is currently blocked
•
by a process.
The operator is not permitted to execute the command (
•
The displays are dependent on the bit values in the
ters.
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
MonTiDynamic
)
)
)
OS_PermOut
, )
MonTiStatic
is logically combined
SelMeas
is logically combined with
SelStat
).
OS_Perm
and parame-
OS_PermLog
SIMOCODE pro PCS 7 Library V9.0