3.2.3.5
Preview view
The preview view shows the operator permissions for each signal block.
The commands for which the operator permissions are shown depend on the block.
Figure 3-7
3.2.4
Scalable faceplates
The faceplates will be scaled from 50% to 200%. The value to scale will be given in the
internal variable "@APLFaceplateScaleFactor". Default value is 100. The faceplates will be
scaled up from 101% to 200%, by providing a value in a range of 101-200 in internal
variable. Similarly the faceplates will be scaled down from 50% to 99% , by providing a value
in the range 50-99. The reference for calculation is default size of the faceplates which is
100(%). It means if the value given is 150, the faceplates will be scaled up by 50% of the
default size.
Note
Faceplate must be reopened after changing the scale value. Already opened faceplate
cannot be scaled up if the scale value is changed.
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
The operator may execute the command.
The operator may execute the command. The command is currently blocked by a
process in the block.
The operator is not permitted to execute the command.
Preview view – example of MMMeas
Block icons and faceplate views
3.2 Faceplates
67