Ftp Client Commands; Append; Ascii - HP 6125XLG Command Reference Manual

<Sysname> system-view
[Sysname] ftp timeout 36

FTP client commands

Before executing FTP client configuration commands, make sure you have configured authorization
settings for users on the FTP server. Authorized operations include view the files under the working
directory, read/download specified files, create directories, upload files, and rename/remove files.
The FTP client commands in this section are supported by the device, but whether they can be executed
successfully depends on the FTP server.
The output in the following examples varies with FTP server types.

append

Use append to add the content of a file on the FTP client to a file on the FTP server.
Syntax
append localfile [ remotefile ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
localfile: Specifies a local file on the FTP client.
remotefile: Specifies a remote file on the FTP server.
Usage guidelines
You can perform this operation only after you log in to the FTP server.
Examples
# Append the content of the local a.txt file to the b.txt file on the FTP server.
ftp> append a.txt b.txt
local: a.txt remote: b.txt
150 Connecting to port 50190
226 File successfully transferred
1657 bytes sent in 0.000736 seconds (2.15 Mbyte/s)

ascii

Use ascii to set the file transfer mode to ASCII.
Syntax
ascii
Default
The file transfer mode is ASCII.
70