Display Sftp Client Source; Exit - HP 5120 SI series Command Reference Manual

Examples
# Display detailed information about the files and sub-directories under the current working directory in
the form of a list.
sftp-client> dir
-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
-rwxrwxrwx
drwxrwxrwx
drwxrwxrwx
-rwxrwxrwx

display sftp client source

Syntax
display sftp client source [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display sftp client source command to display the source IP address or source interface currently
set for the SFTP client.
If neither source IP address nor source interface is specified for the SFTP client, the system will display the
a message "Neither source IP address nor source interface was specified for the SFTP client."
Related commands: sftp client source.
Examples
# Display the source IP address of the SFTP client.
<Sysname> display sftp client source
The source IP address you specified is 192.168.0.1

exit

Syntax
exit
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1 noone nogroup
1759 Aug 23 06:52 config.cfg
225 Aug 24 08:01 pubkey2
283 Aug 24 07:39 pubkey1
225 Sep 28 08:28 pub1
0 Sep 28 08:24 new1
0 Sep 28 08:18 new2
225 Sep 28 08:30 pub2
258