LEDs
System status LED
The system status LED shows the operating status of the switch.
Table 23 System status LED description
LED
SYS
ID LED
Each switch has an ID LED to show the IRF member switch role.
Table 24 ID LED description
LED
ID
Fan status LED
The fan status LED (FAN) shows the fan tray operating status.
Table 25 Fan status LED description
LED
FAN
LPU status LED
The LPU status LED (SLOT) shows the LPU operating status.
Status
Description
Steady green
The switch is booting up.
Flashing green
The switch is operating correctly.
Flashing red
Faults have occurred on the switch.
Off
The switch is powered off.
Status
Description
Steady green
The switch is operating as a master switch.
Off
The switch is operating as a subordinate switch.
When you execute the flashing beacon [ switch member-id ] command, the ID
LED of the specified member switch fast flashes.
The LED restores to the previous state when you execute the undo flashing
beacon command.
Flashing green
NOTE:
For more information about the flashing beacon command, see HP FlexFabric
7900 Switch Series IRF Command Reference.
Status
Green
Red
Description
The fan tray is operating correctly.
The fan tray is faulty or no fan tray is installed.
50