Display Mac-Address Vsi - HP 5800 series Command Reference Manual

Field
Flag
LB Offset
LB Size
LB Base
LB NewBase
RefCount
MED
AS Path
MTU
Encap Type

display mac-address vsi

Description
Use the display mac-address vsi command to display the MAC address table information of a specified
VPLS instance or all VPLS instances.
Related commands: vsi; mac-address (Layer 2—LAN Switching Command Reference).
Syntax
display mac-address vsi [ vsi-name ] [ blackhole | dynamic | static ] [ count ] [ | { begin | exclude |
include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vsi-name: Specifies the name of the VPLS instance, which is a case-insensitive string of 1 to 31 characters.
Hyphens (-) are not allowed.
blackhole: Specifies the black hole MAC forwarding entries.
Description
Current status of the label
0x0001 (BGP_VPLS_LB_NOT_SENTTO_VPLS)
0x0002 (BGP_VPLS_LB_SENTTO_VPLS)
0x0004 (BGP_VPLS_LB_SELECTED)
0x0008 (BGP_VPLS_LB_ASBR_TNLDOWN)
0x0010 (BGP_VPLS_LB_FROM_RR_IBGP)
0x0020 (BGP_VPLS_LB_FROM_RR_EBGP)
0x0040 (BGP_VPLS_LB_FROM_IBGP)
0x0080 (BGP_VPLS_LB_FROM_EBGP)
0x0085 (BGP_VPLS_LB_NOT_SENTTO_VPLS |
BGP_VPLS_LB_SELECTED |
BGP_VPLS_LB_FROM_EBGP)
Label offset value
Label size
Initial label of the label base
New label base
Label reference count
Cost value
AS path of the route
Maximum transmission unit at Layer 2
Encapsulation type
204