Table of Contents
Advertisement
save mode is on, location based automatic lap, automatic pause and
route guidance cannot be used. In addition, Running Index cannot be
used unless you have a stride sensor, and Race Pace cannot be used
unless you have a stride sensor or speed sensor.
Incline: See your incline during your session and afterwards in the Flow
l
web service. Uphill/downhill steepness is shown in percentages and
grade. Only available in high accuracy GPS mode.
When using power save mode, the GPS data is not as accurate as in high
accuracy mode. Power save mode is only recommended to be used in long
sessions lasting over 10 hours.
When training with either a Polar Stride Sensor Bluetooth® Smart or Polar
Speed Sensor Bluetooth® Smart with GPS set on, speed and distance
information is collected from the stride sensor or speed sensor, not the GPS.
However, route information is collected from the GPS.
For best GPS performance, wear V800 on your wrist with the display facing
up. Due to the location of the GPS antenna on the V800, it is not
recommended to wear it with the display on the underside of your wrist.
When wearing it on the handlebars of a bike, make sure the display is facing
up.
Back to start
The back to start feature guides you back to the starting point of your session
or to a saved POI.
To use the back to start feature:
1Press and hold LIGHT during a training session.
2Choose
Set location guide
3Choose
Starting point
on,
Set target point
(default).
95
Quick menu
is displayed.
is displayed.
Advertisement
Table of Contents
