Table of Contents
Advertisement
Polar LOOK Kéo Power Sensor Bluetooth ®
Smart
Pair Kéo Power with V800
Before pairing Kéo Power make sure you have installed the it correctly. For
information on mounting the pedals and installing the transmitters see the
Polar LOOK Kéo Power user manual that came in the product box or the
video tutorial.
Both transmitters need to be paired one at a time, therefore you have to
perform the pairing twice when taking Kéo Power into use. After pairing the
first transmitter, you can immediately pair the second one by selecting it
from the list. Check the device ID can found on the backside of each
transmitter to make sure both transmitters have been paired.
There are two ways to pair Keó Power with your V800:
1Press START in time view to enter pre-training mode.
2Rotate the cranks to wake up the transmitters.
3The device ID
4Pairing completed
or
1Go to
General Settings > Pair and sync > Pair other device
START.
2Rotate the cranks to wake up the transmitters. V800 starts searching for
Kéo Power.
Pair Polar PWR xxxxxxxx
is shown when you are done.
is displayed. Choose Yes.
159
and press
Advertisement
Table of Contents
