Caring For Your V800 - Polar Electro V800 User Manual

Caring for Your V800

Like any electronic device, Polar V800 should be treated with care. The
suggestions below will help you fulfill guarantee obligations and enjoy this
product for many years to come.
V800
Keep your training device clean. Use a damp paper towel to wipe dirt from
the training device. To maintain the water resistance, do not wash the
training device with a pressure washer. Never use alcohol or any abrasive
material such as steel wool or cleaning chemicals.
After each time of using the USB port of the training device, check visually
that there is no hair, dust or other dirt on the connector. Gently wipe to
remove any dirt from the connector pins by using a dry cleaning cloth (like
one used to clean glass surfaces). A toothpick can be used to remove hair,
dust or other dirt from the connector cavity. Rinse the USB connector with
lukewarm water after each session.
The combined impact of moisture and intense abrasion may cause a darker
color to come off clothing possibly staining the blue-colored V800.
Operating temperatures are -10 °C to +50 °C / +14 °F to +122 °F.
Heart rate sensor
Connector: Detach the connector from the strap after every use and dry the
connector with a soft towel. Clean the connector with a mild soap and water
solution when needed. Never use alcohol or any abrasive material (e.g. steel
wool or cleaning chemicals).
Strap: Rinse the strap under running water after every use and hang to dry.
Clean the strap gently with a mild soap and water solution when needed. Do
not use moisturizing soaps, because they can leave residue on the strap. Do
163