Calibrate The Stride Sensor - Polar Electro V800 User Manual

1Press START in time view to enter pre-training mode.
2Touch your stride sensor with V800, and wait for it to be found.
3The device ID
4Pairing completed
or
1Go to General Settings > Pair and sync > Pair other device
START.
2V800 starts searching for your stride sensor.
3Once the stride sensor is found,
4Press START,
5Pairing completed

Calibrate the Stride Sensor

Calibration of the stride sensor improves the accuracy of speed/pace and
distance measurements. It is recommended that you calibrate the stride
sensor before using it for the first time, if there are significant changes in
your running style, or if the position of the stride sensor on the shoe is
dramatically changed (e.g. if you have new shoes or if you switch the sensor
from your right shoe to your left one). The calibration should be done at the
speed you normally run. If you run at different speeds, the calibration should
be done at your average speed. You can calibrate the stride sensor manually
or automatically.
When training with a stride sensor you can choose to use speed data from
GPS or from the stride sensor. To set this go to
Running> Stride sensor > Choose sensor for
sensor or GPS.
Pair Polar RUN xxxxxxxx
is shown when you are done.
Pairing is displayed.
is displayed when you are done.
is displayed. Choose Yes.
Polar RUN xxxxxxxx
Settings > Sport profiles >
speed, and choose
151
and press
is displayed.
Stride