Power Settings On V800 - Polar Electro V800 User Manual

3Once the it is found,
4Press START,
5Pairing completed

Power Settings on V800

Adjust the power settings to best suit your training needs. Edit the power
settings in Settings > Sport
and choose Bike power
In the Bike power settings
Power view: Choose
l
Power, rolling
l
are recorded. Choose 1, 3, 5,10, 15, 30 or 60 seconds.
Set FTP value: Set your FTP value. The setting range is 60 to 600 watts.
l
Check power zone
l
Calibrate Kéo Power
Calibrate Kéo Power before starting your session. V800 calibrates itself
automatically each time the transmitters wake up and V800 is found. The
calibration takes a couple of seconds.
Training temperature has an effect on the calibration accuracy, so make
sure your bike's temperature has become stable before you start the offset
calibration.
To calibrate Kéo power:
1Wake up the transmitters by rotating the cranks and choose pre-training
mode on your V800 to start the calibration.
2Keep the bike upright and cranks in place until calibration is completed.
Polar PWR xxxxxxxx
Pairing is displayed.
is displayed when you are done.
profiles, and choose the profile you want to edit,
settings.
you'll find:
Watts (W),
average: Set how frequently data points of your power
limits: Check your power zone limits.
is displayed.
Watts/kg (W/kg)
160
or % of FTP.