Lock A Heart Rate Zone - Polar Electro V800 User Manual

also be taken automatically. In sport profile settings, set
Lap distance, Lap duration
set the distance after which each lap is taken. If you choose
the duration after each lap is taken. If you choose
always be taken at a specific location (the starting point of your session or
POI you have marked during your session).

Lock a Heart Rate Zone

Press and hold START to lock the heart rate zone you are currently in. To
lock/unlock the zone, press and hold START. If your heart rate goes outside
the locked zone, you will be notified with audio and vibration feedback.
Change Sport Specific Tap Sensitivity
Press and hold LIGHT.
sensitivity from the list and choose
Very strong tap
sport.
Change Phase During a Phased Session
Press and hold LIGHT.
from the list, and press START (if manual phase change is chosen when
creating the target). If automatic is chosen, the phase will change
automatically when you have finished a phase.
View Quick Menu
Press and hold LIGHT.
settings without pausing your training session. For more information, "Quick
Menu" on page 61
Set Constant Backlight On
Press and hold LIGHT.
from the list, and press START. When enabled, the backlight stays on
or Location-
Quick menu
or Off to customize the sensitivity to best suit your current
Quick menu
Quick menu
Quick menu
based. If you choose
Location-
is displayed. Choose
Light tap, Normal tap, Strong tap,
is displayed. Choose
is displayed. You can change certain
is displayed. Choose
82
Automatic lap to
Lap distance,
Lap duration, set
based, a lap will
Sport specific tap
Start next phase
Set backlight on