Polar Electro V800 User Manual page 53

Bike power settings are visible only if Kéo Power has been paired.
GPS recording: Choose Off,
l
save, long
Sport specific tap
l
Strong tap
when using tap gestures.
Stride sensor: Choose
l
ibration, choose
set the source for speed data:
ation on Stride sensor calibration, "Polar Stride Sensor Bluetooth®
Smart" on page 150
Stride sensor is visible only if a stride sensor has been paired.
Calibrate altitude:Set the correct altitude. It is recommended to always
l
manually calibrate altitude when you know your current altitude.
Altitude calibration is only visible when accessing sport profile settings
from pre-training mode.
Speed View: Choose
l
per kilometer). If you have chosen imperial units, choose
hour) or min/mi
Automatic
l
pauseOn, your session is automatically paused when you stop moving.
GPS recording must be set to high accuracy to use automatic pause.
Automatic
l
based. If you choose
session.
sensitivity: Choose Off,
or Very strong
Calibration
Automatic
km/h
(minutes per mile).
pause: Choose
lap: Choose Off,
Lap distance, set the distance after which each lap
High accuracy,
tap. Set how hard you have to tap the display
or Choose sensor for
or Manual. In
Stride sensor
(kilometers per hour) or min/km(minutes
On or Off. If you set the
Lap distance,
53
Medium accuracy
Light tap, Normal
speed. In
Choose sensor for
or GPS. For more inform-
mph
automatic
Lap duration or
or Power
tap,
Cal-
speed,
(miles per
Location-