Polar Speed Sensor Bluetooth® Smart - Polar Electro V800 User Manual

Polar Speed Sensor Bluetooth ® Smart
Pair a Speed Sensor with V800
Make sure the speed sensor has been correctly installed. For more
information on installing the speed sensor refer to the user manual of the
speed sensor.
There are two ways to pair a speed sensor with your V800:
1Press START in time view to enter pre-training mode.
2V800 starts searching for your speed sensor. Rotate the wheel a few
times to activate the sensor. The flashing red light in the sensor indicates
that the sensor is activated.
3The device ID
4Pairing completed
5Sensor linked to:
START.
6Set wheel size
or
1Go to General Settings > Pair and sync > Pair other device
START.
2V800 starts searching for the speed sensor. Rotate the wheel a few times
to activate the sensor. The flashing red light in the sensor indicates that
the sensor is activated.
3Once the speed sensor is found,
Pair Polar SPD xxxxxxxx
is displayed when the pairing is complete.
is displayed. Choose
is displayed. Set the size and press START.
is displayed. Choose Yes.
Bike 1 or
Polar SPD xxxxxxxx
155
Bike 2. Confirm with
and press
is displayed.