Pair Polar Balance Scale With V800 - Polar Electro V800 User Manual

4Press START,
5Pairing completed
For more information on pairing specific sensors, "Sensors" on page 150

Pair Polar Balance Scale with V800

There are two ways to pair a Polar Balance scale with your V800:
1Step on the scale. The display shows your weight.
2After a beep sound, the Bluetooth icon on the scale display starts flash-
ing, which means that the connection is now on. The scale is ready to be
paired with your V800.
3Press and hold the BACK button for 2 seconds on your V800 and wait
until the display indicates the pairing is complete.
or
1Go to General Settings > Pair and sync > Pair other device
START.
2V800 starts searching for your scale.
3Step on the scale. The display shows your weight.
4Once the scale is found, the device ID
on your V800.
5Press START,
6Pairing completed
The scale can be paired with 7 different Polar devices. When the number
of paired devices exceeds 7, the first pairing will be removed and replaced.
Pairing is displayed.
is displayed when you are done.
Pairing is displayed.
is shown when you are done.
Polar scale xxxxxxxx
45
and press
is displayed