Table of Contents
Advertisement
Manual Calibration
Manual calibration can be done in two ways. You can run a distance you
know, and set the correct distance in
calibration factor manually if you know the factor which gives you accurate
distance.
SET CORRECT LAP DISTANCE
To calibrate the stride sensor manually by setting correct lap distance,
choose
Settings > Sport profiles > Running> Stride sensor > Calibration >
Manual > Set correct lap distance
1Press START in time view to enter pre-training mode, and scroll to the
Running profile
2Start a session, and run a distance you know that is more than 400
meters.
3When you have the ran the distance, press START to take a lap.
4Press and hold light to enter the Quick menu, and choose
> Calibration > Manual > Set correct lap distance
5Set the actual distance you have ran. The calibration factor is updated.
SET FACTOR
To calibrate the stride sensor manually by setting the factor, choose
> Sport profiles > Running> Stride sensor > Calibration > Manual > Set
factor: If you already know the factor which gives you accurate distance.
Calibrated. Factor: xxxx
Manual calibration can also be started during a session, when the stride
sensor is in use. Press and hold LIGHT to enter the
choose
Stride sensor > Calibration >
Quick
is displayed when you are done.
Manual.
152
menu. You can also set the
Quick menu
Stride sensor
Settings
and then
Advertisement
Table of Contents
