Polar Electro V800 User Manual page 158

1Press START in time view to enter pre-training mode.
2V800 starts searching for your cadence sensor. Rotate the crank a few
times to activate the sensor. The flashing red light in the sensor indicates
that the sensor is activated.
3The device ID
4Pairing completed
5Sensor linked to:
START.
or
1Go to General Settings > Pair and sync > Pair other device
START.
2V800 starts searching for the cadence sensor. Rotate the crank a few
times to activate the sensor. The flashing red light in the sensor indicates
that the sensor is activated.
3Once the cadence sensor is found,
4Press START,
5Pairing completed
6Sensor linked to:
START.
Pair Polar CAD xxxxxxxx
is displayed when the pairing is complete.
is displayed. Choose
Pairing is displayed.
is displayed when the pairing is complete.
is displayed. Choose
is displayed. Choose Yes.
Bike 1 or
Polar CAD xxxxxxxx
Bike 1 or
158
Bike 2. Confirm with
and press
is displayed.
Bike 2. Confirm with