Pair A Heart Rate Sensor With V800 - Polar Electro V800 User Manual

Pair a Heart Rate Sensor with V800

There are two ways to pair a heart rate sensor with your V800:
1Wear your heart rate sensor, and press START in time view to enter pre-
training mode.
2To pair, touch your sensor with V800 is
rate sensor with V800, and wait for it to be found.
3The device ID
4Pairing completed
or
1Go to General Settings > Pair and sync > Pair other device
START.
2V800 starts searching for your heart rate sensor.
3Once the heart rate sensor is found, the device
displayed.
4Press START,
5Pairing completed
When using a H7 heart rate sensor, V800 may detect your heart rate via
GymLink transmission before you have paired it. Make sure you have paired
your heart rate sensor before starting training. GymLink transmission is
optimized to be used in swimming, therefore your heart rate is shown in gray
in other sport profiles if you haven't paired your heart rate sensor via
Bluetooth®.
Pair Polar H7 xxxxxxxx
is shown when you are done.
Pairing is displayed.
is displayed when you are done.
displayed, touch your heart
is displayed. Choose Yes.
ID Polar H7 xxxxxxxx
43
and press
is