Table of Contents
Advertisement
Pairing
Pair a Heart Rate Sensor with V800
Pair a Stride, Speed or Cadence Sensor with V800
Pair Polar Balance Scale with V800
Pair a Mobile Device with V800
Delete a Pairing
Syncing
Sync with Flow App
Sync With Flow Web Service Via FlowSYnc
Charge the Battery
After unboxing your V800, the first thing you need to do is charge the battery.
Let your V800 fully charge before taking it into use for the first time.
The V800 has an internal, rechargeable battery. Use the custom USB cable
included in the product set to charge it via the USB port on your computer.
You can also charge the battery via a wall outlet. When charging via a wall
outlet use a USB power adapter (not included in the product set). If you use
an AC adapter, make sure that the adapter is marked with "output 5Vdc 0.5A -
2A max". Only use an AC adapter which is adequately safety approved
(marked with "LPS", "Limited Power Supply" or "UL listed"). Do not charge the
battery in temperatures under -10 °C or over +50 °C.
1Snap the custom USB connector onto your V800.
2Plug the other end of the cable into your computer's USB port.
3Charging
appears on the display.
4When V800 is fully charged,
Charging completed
29
is displayed.
42
43
44
45
46
47
47
48
49
Advertisement
Table of Contents
