Network (Area) Command - Avaya P333R User Manual

Chapter 7 Cajun Campus CLI - Layer 3

network (area) Command

Use the network command to enable OSPF in this network. The no form of this
command disables the OSPF in this network. The default is disabled.
The syntax for this command is:
network <net addr> [<wildcard-mask> [area <area id>]]
net addr
wildcard-mask
area id
Example:
Router-N(configure router:ospf)# network 192.168.0.0
Router-N(configure router:ospf)# network 192.168.0.0
0.0.255.255 area 0.0.0.0
ip ospf router-id Command
Use the ip ospf router-id command to configure router identity. The no
form of this command returns the router identity to its default (lowest IP interface
that exists).
The syntax for this command is:
[no] ip ospf router-id <router id>
router id
Example:
Router-N(configure router:ospf)# ip ospf router-id
192.168.49.1
190
IP address
Wildcard mask address
Area ID. This parameter exists for compatibility with
Avaya P550.
IP address
Avaya P333R User's Guide