Omron R88M-K User Manual page 573

Object Description Format
In this manual, objects are described in the following format.
Object Description Format
The object format is shown below.
<Object name>
<Index>
Range <Range>
Size <Size>
Data is indicated in pointed brackets <>.
Possible data are listed below.
Index:
Object name:
Modes of
Operation:
Range:
Unit:
Default:
Attribute:
Size:
Access:
PDO map:
G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
Unit <Unit>
Access
Object index given by a four-digit hexadecimal number.
The object name.
Related operation modes.
Common: All operation modes
csp: Cyclic synchronous position mode
csv: Cyclic synchronous velocity mode
cst: Cyclic synchronous torque mode
pp: Profile position mode
hm: Homing mode
(Semi): Only operation modes related to semi-closed control.
(Full): Only operation modes related to fully-closed control.
The possible range of settings.
Physical units.
Default value set before shipment.
The timing when a change in the contents is updated for a writable object.
A: Always updated
B: Changing prohibited during motor rotation or commands.
If a change is made during motor rotation or commands, the update timing is unknown.
C: Updated after the control power is reset, or after a Config command is executed via
EtherCAT communications.
D: Changeable only when the EtherCAT communications state is Pre-Operational (Pre-Op).
R: Updated after the control power is reset.
It is not updated for a Config command via EtherCAT communications.
−: Write prohibited.
The object size is given in bytes.
Indicates whether the object is read only, or read and write.
RO: Read only.
RW: Read and write.
Indicates the PDO mapping attribute.
Possible (RxPDO): Reception PDOs can be mapped.
Possible (TxPDO): Transmission PDOs can be mapped.
Not possible: PDOs cannot be mapped.
Default <Default>
<Access> PDO map
Appendices
Modes of Operation
Attribute <Attribute>
<Possible/Not possible>
A-23