Option - Cisco Catalyst 3650 series Command Reference Manual

option

option
To configure optional data parameters for a flow exporter for Flexible NetFlow, use the option command in
flow exporter configuration mode. To remove optional data parameters for a flow exporter, use the no form
of this command.
option {exporter-stats| interface-table| sampler-table} [timeout seconds]
no option {exporter-stats| interface-table| sampler-table}
Syntax Description
exporter-stats
interface-table
sampler-table
timeout seconds
Command Default
The timeout is 600 seconds. All other optional data parameters are not configured.
Command Modes
Flow exporter configuration
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
The option exporter-stats command causes the periodic sending of the exporter statistics, including the
number of records, bytes, and packets sent. This command allows the collector to estimate packet loss for the
export records it receives. The optional timeout alters the frequency at which the reports are sent.
The option interface-table command causes the periodic sending of an options table, which allows the
collector to map the interface SNMP indexes provided in the flow records to interface names. The optional
timeout can alter the frequency at which the reports are sent.
The option sampler-table command causes the periodic sending of an options table, which details the
configuration of each sampler and allows the collector to map the sampler ID provided in any flow record to
a configuration that it can use to scale up the flow statistics. The optional timeout can alter the frequency at
which the reports are sent.
To return this command to its default settings, use the no option or default option flow exporter configuration
command.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
458
Configures the exporter statistics option for flow exporters.
Configures the interface table option for flow exporters.
Configures the export sampler table option for flow exporters.
(Optional) Configures the option resend time in seconds for flow
exporters. The range is 1 to 86400. The default is 600.
Modification
This command was introduced.