show storm-control
Table 42: show storm-control Field Descriptions
Field
Interface
Filter State
Upper
Lower
Current
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
824
Description
Displays the ID of the interface.
Displays the status of the filter:
• Blocking—Storm control is enabled, and a
storm has occurred.
• Forwarding—Storm control is enabled, and no
storms have occurred.
• Inactive—Storm control is disabled.
Displays the rising suppression level as a percentage
of total available bandwidth in packets per second or
in bits per second.
Displays the falling suppression level as a percentage
of total available bandwidth in packets per second or
in bits per second.
Displays the bandwidth usage of broadcast traffic or
the specified traffic type (broadcast, multicast, or
unicast) as a percentage of total available bandwidth.
This field is only valid when storm control is enabled.