Switchport Voice Vlan - Cisco Catalyst 3650 series Command Reference Manual

switchport voice vlan

switchport voice vlan
To specify to forward all voice traffic through the specified VLAN, use the switchport voice vlan command
in template configuration mode. Use the no form of this command to return to the default setting.
switchport voice vlanvlan_id
no switchport voice vlan
Syntax Description
switchport voice vlanvlan_id
Command Default
You can specify a value from 1 to 4094.
Command Modes
Template configuration
Command History
Release
Cisco IOS XE 3.3SE
Examples This example shows how to specify to forward all voice traffic through the specified VLAN.
Device(config-template)# switchport voice vlan 20
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
568
Specifies to forward all voice traffic through the specified
VLAN.
Modification
This command was introduced.