Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

show eee
This is an example of output from the show eee capabilities command on an interface where EEE is not
enabled:
Device# show eee capabilities interface gigabitethernet2/0/1
Gi2/0/1
This is an example of output from the show eee status command on an interface where EEE is enabled and
operational. The table that follows describes the fields in the display.
Device# show eee status interface gigabitethernet1/0/4
Gi1/0/4 is up
This is an example of output from the show eee status command on an interface where EEE operational and
the ports are in low power save mode:
Device# show eee status interface gigabitethernet1/0/3
Gi1/0/3 is up
This is an example of output from the show eee status command on an interface where EEE is not enabled
because a remote link partner is incompatible with EEE:
Device# show eee status interface gigabitethernet1/0/3
Gi1/0/3 is down

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

68
EEE(efficient-ethernet):
Link Partner :
EEE(efficient-ethernet):
Rx LPI Status :
Tx LPI Status :
EEE(efficient-ethernet):
Rx LPI Status :
Tx LPI Status :
Wake Error Count :
EEE(efficient-ethernet):
Rx LPI Status :
Tx LPI Status :
Wake Error Count :
not enabled
not enabled
Operational
Received
Received
Operational
Low Power
Low Power
0
Disagreed
None
None
0