Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

Field
Port State
This is an example of output from the show lacp neighbor command:
Device> show lacp neighbor
Flags: S - Device is sending Slow LACPDUs
A - Device is in Active mode
Channel group 3 neighbors
Partner's information:
Partner
Port System ID
Gi2/0/1 32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
Partner's information:
Partner
Port System ID
Gi2/0/2 32768,0007.eb49.5e80
LACP Partner
Port Priority
32768
This is an example of output from the show lacp sys-id command:
Device> show lacp sys-id
32765,0002.4b29.3a00
The system identification is made up of the system priority and the system MAC address. The first two bytes
are the system priority, and the last six bytes are the globally administered individual MAC address associated
to the system.
Description
State variables for the port, encoded as individual bits
within a single octet with these meanings:
• bit0: LACP_Activity
• bit1: LACP_Timeout
• bit2: Aggregation
• bit3: Synchronization
• bit4: Collecting
• bit5: Distributing
• bit6: Defaulted
• bit7: Expired
Note
F - Device is sending Fast LACPDUs
P - Device is in Passive mode
Partner
Port Number Age
0xC 19s
Partner Partner
Oper Key Port State
0x3 0x3C
Partner
Port Number Age
0xD 15s
Partner Partner
Oper Key Port State
0x3 0x3C

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

In the list above, bit7 is the MSB and bit0 is
the LSB.
Partner
Flags
SP
Partner
Flags
SP
show lacp
343