Show Cts Interface - Cisco Catalyst 3650 series Command Reference Manual

show cts interface

show cts interface
To display Cisco TrustSec (CTS) configuration statistics for an interface, use the show cts interface command
in EXEC or privileged EXEC mode.
show cts interface [type slot/port| brief| summary]
Syntax Description
type slot/port
brief
summary
Command Default
None
Command Modes
EXEC (>) Privileged EXEC (#)
Command History
Release
Cisco IOS XE Denali 16.3.1
Cisco IOS XE Denali 16.2.1
Usage Guidelines
Use the show cts interface command without keywords to display verbose status for all CTS interfaces.
Examples The following example displays output without using a keyword (verbose status for all CTS interfaces):
Switch# show cts interface
Global Dot1x feature is Disabled
Interface GigabitEthernet0/1/0:
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
808
CTS is enabled, mode:
IFC state:
Interface Active for 00:00:18.232
Authentication Status:
Peer identity:
Peer's advertised capabilities: ""
Authorization Status:
SAP Status:
(Optional) Specifies an interface type and slot or port
number. A verbose output for this interface is
returned.
(Optional) Displays abbreviated status for all CTS
interfaces.
(Optional) Displays a tabular summary of all CTS
interfaces with 4 or 5 key status fields for each
interface.
Modification
This command was modified with additional options.
This command was introduced.
MANUAL
OPEN
NOT APPLICABLE
"unknown"
NOT APPLICABLE
NOT APPLICABLE