Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

The following example displays output using the brief keyword:
Device# show cts interface brief
Global Dot1x feature is Disabled
Interface GigabitEthernet0/1/0:
Related Commands
Command
cts manual
propagate sgt (cts manual)
Configured pairwise ciphers:
gcm-encrypt
null
Replay protection:
Replay protection mode: STRICT
Selected cipher:
Propagate SGT:
Cache Info:
Cache applied to link : NONE
Statistics:
authc success:
authc reject:
authc failure:
authc no response:
authc logoff:
sap success:
sap fail:
authz success:
authz fail:
port auth fail:
Ingress:
control frame bypassed: 0
sap frame bypassed:
esp packets:
unknown sa:
invalid sa:
inverse binding failed: 0
auth failed:
replay error:
Egress:
control frame bypassed: 0
esp packets:
sgt filtered:
sap frame bypassed:
unknown sa dropped:
unknown sa bypassed:
CTS is enabled, mode:
IFC state:
Interface Active for 00:00:40.386
Authentication Status:
Peer identity:
Peer's advertised capabilities: ""
Authorization Status:
SAP Status:
Propagate SGT:
Cache Info:
Cache applied to link : NONE
enabled
Enabled
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
MANUAL
OPEN
NOT APPLICABLE
"unknown"
NOT APPLICABLE
NOT APPLICABLE
Enabled
Description
Enables an interface for CTS.
Enables Security Group Tag (SGT) propagation at
Layer 2 on Cisco TrustSec Security (CTS) interfaces.

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

show cts interface
809