Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

match (class-map configuration)
mnemonics, enter the match ip dscp ? or the match ip precedence ? command to see the command-line help
strings.
Use the input-interface interface-id-list keyword when you are configuring an interface-level class map in
a hierarchical policy map. For the interface-id-list, you can specify up to six entries.
Examples
This example shows how to create a class map called class2, which matches all the incoming traffic with
DSCP values of 10, 11, and 12:
Device(config)# class-map class2
Device(config-cmap)# match ip dscp 10 11 12
Device(config-cmap)# exit
This example shows how to create a class map called class3, which matches all the incoming traffic with
IP-precedence values of 5, 6, and 7:
Device(config)# class-map class3
Device(config-cmap)# match ip precedence 5 6 7
Device(config-cmap)# exit
This example shows how to delete the IP-precedence match criteria and to classify traffic using acl1:
Device(config)# class-map class2
Device(config-cmap)# match ip precedence 5 6 7
Device(config-cmap)# no match ip precedence
Device(config-cmap)# match access-group acl1
Device(config-cmap)# exit
This example shows how to specify a list of physical ports to which an interface-level class map in a hierarchical
policy map applies:
Device(config)# class-map match-any class4
Device(config-cmap)# match cos 4
Device(config-cmap)# exit
This example shows how to specify a range of physical ports to which an interface-level class map in a
hierarchical policy map applies:
Device(config)# class-map match-any class4
Device(config-cmap)# match cos 4
Device(config-cmap)# exit
You can verify your settings by entering the show class-map privileged EXEC command.

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

649