Ip Admission - Cisco Catalyst 3650 series Command Reference Manual

ip admission

To enable web authentication, use the ip admission command in interface configuration mode. You can also
use this command in fallback-profile configuration mode. To disable web authentication, use the no form of
this command.
ip admission rule
no ip admission rule
Syntax Description
rule
Command Default
Web authentication is disabled.
Command Modes
Interface configuration
Fallback-profile configuration
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
The ip admission command applies a web authentication rule to a switch port.
Examples This example shows how to apply a web authentication rule to a switchport:
Device# configure terminal
Device(config)# interface gigabitethernet1/0/1
Device(config-if)# ip admission rule1
This example shows how to apply a web authentication rule to a fallback profile for use on an IEEE 802.1x
enabled switch port.
Device# configure terminal
Device(config)# fallback profile profile1
Device(config-fallback-profile)# ip admission rule1
IP admission rule name.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
ip admission
Modification
This command was introduced.
759