L2Protocol-Tunnel - Cisco Catalyst 3650 series Command Reference Manual

l2protocol-tunnel

l2protocol-tunnel
To enable tunneling of Layer 2 protocols on an access port, IEEE 802.1Q tunnel port, or a port channel, use
the l2protocol-tunnel command in interface configuration mode on the switch stack or on a standalone
switch. Use the no form of this command to disable tunneling on the interface.
l2protocol-tunnel [drop-threshold | shutdown-threshold] [value] [cdp| stp | vtp ] [lldp] [point-to-point|
[pagp| lacp| udld]]
no l2protocol-tunnel [drop-threshold | shutdown-threshold] [value] [cdp| stp | vtp ] [lldp] [point-to-point|
[pagp| lacp| udld]]
Syntax Description
drop-threshold
shutdown-threshold
value
cdp
stp
vtp
lldp
point-to-point
pagp
lacp
udld
Command Default
The default is that no Layer 2 protocol packets are tunneled.
The default is no shutdown threshold for the number of Layer 2 protocol packets.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
1018
(Optional) Sets a drop threshold for the maximum rate of Layer 2 protocol packets
per second to be received before an interface drops packets.
(Optional) Sets a shutdown threshold for the maximum rate of Layer 2 protocol packets
per second to be received before an interface is shut down.
A threshold in packets per second to be received for encapsulation before the interface
shuts down, or the threshold before the interface drops packets. The range is 1 to 4096.
The default is no threshold.
(Optional) Enables tunneling of CDP, specifies a shutdown threshold for CDP, or
specifies a drop threshold for CDP.
(Optional) Enables tunneling of STP, specifies a shutdown threshold for STP, or
specifies a drop threshold for STP.
(Optional) Enables tunneling or VTP, specifies a shutdown threshold for VTP, or
specifies a drop threshold for VTP.
(Optional) Enables tunneling of LLDP packets.
(Optional) Enables point-to point tunneling of PAgP, LACP, and UDLD packets.
(Optional) Enables point-to-point tunneling of PAgP, specifies a shutdown threshold
for PAgP, or specifies a drop threshold for PAgP.
(Optional) Enables point-to-point tunneling of LACP, specifies a shutdown threshold
for LACP, or specifis a drop threshold for LACP.
(Optional) Enables point-to-point tunneling of UDLD, specifies a shutdown threshold
for UDLD, or specifies a drop threshold for UDLD.