Standby Console Enable - Cisco Catalyst 3650 series Command Reference Manual

standby console enable

standby console enable
To enable access to the standby console switch, use the standby console enable command in redundancy
main configuration submode. To disable access to the standby console switch, use the no form of this command.
standby console enable
no standby console enable
Syntax Description
This command has no arguments or keywords.
Command Default
Access to the standby console switch is disabled.
Command Modes
Redundancy main configuration submode
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
This command is used to collect and review specific data about the standby console. The command is useful
primarily for Cisco technical support representatives troubleshooting the switch.
Examples This example shows how to enter the redundancy main configuration submode and enable access to the standby
console switch:
Device(config)# redundancy
Device(config-red)# main-cpu
Device(config-r-mc)# standby console enable
Device(config-r-mc)#
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
878
Modification
This command was introduced.