Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

power-oper-status-changed
power-priority-conflict
power-version-mismatch
ring-redundant
stack-mismatch
unbalanced-power-supplies
under-budget
under-voltage
Command Default
The sending of SNMP StackWise traps is disabled.
Command Modes
Global configuration
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Specify the host (NMS) that receives the traps by using the snmp-server host global configuration command.
If no trap types are specified, all trap types are sent.
Note Informs are not supported in SNMPv1.
To enable more than one type of trap, you must enter a separate snmp-server enable traps command for
each trap type.
Examples
This example shows how to generate StackWise stack power GLS traps:
Device(config)# snmp-server enable traps stackwise GLS
(Optional) Enables StackWise stack power port oper status changed
trap.
(Optional) Enables StackWise stack power priority conflict trap.
(Optional) Enables StackWise stack power version mismatch
discovered trap.
(Optional) Enables StackWise stack ring redundant trap.
(Optional) Enables StackWise stack mismatch trap.
(Optional) Enables StackWise stack power unbalanced power supplies
trap.
(Optional) Enables StackWise stack power under budget trap.
(Optional) Enables StackWise stack power under voltage trap.
Modification
This command was introduced.

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

snmp-server enable traps stackwise
553