Show Class-Map - Cisco Catalyst 3650 series Command Reference Manual

show class-map

To display quality of service (QoS) class maps, which define the match criteria to classify traffic, use the
show class-map command in EXEC mode.
show class-map [class-map-name | type control subscriber {all | class-map-name}]
Syntax Description
class-map-name
type control subscriber
all
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples This is an example of output from the show class-map command:
Device# show class-map
Class Map match-any videowizard_10-10-10-10 (id 2)
Match access-group name videowizard_10-10-10-10
Class Map match-any class-default (id 0)
Match any
Class Map match-any dscp5 (id 3)
Match ip dscp 5
Related Commands
Command
class-map
(Optional) Class map name.
(Optional) Displays information about control class maps.
(Optional) Displays information about all control class maps.
Modification
This command was introduced.
Description
Creates a class map to be used for matching packets to the class whose name
you specify and enters class-map configuration mode.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show class-map
667