show vlan access-map
To display information about a particular VLAN access map or for all VLAN access maps, use the show vlan
access-map command in privileged EXEC mode.
show vlan access-map [map-name]
Syntax Description
map-name
Command Default
None
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Examples
This is an example of output from the show vlan access-map command:
Device# show vlan access-map
Vlan access-map "vmap4"
Match clauses:
Action:
Vlan access-map "vmap4"
Match clauses:
Action:
Related Commands
Command
show vlan filter
vlan access-map
vlan filter
10
ip
address: al2
forward
20
ip
address: al2
forward
Displays information about all VLAN filters or about a particular VLAN or
VLAN access map.
Defines a VLAN map and enters access-map configuration mode where you
can specify a MAC ACL to match and the action to be taken.
Applies a VLAN map to one or more VLANs.
(Optional) Name of a specific VLAN access map.
Description
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
show vlan access-map
Modification
This command was introduced.
825