Show Platform Ip Wccp - Cisco Catalyst 3650 series Command Reference Manual

show platform ip wccp

show platform ip wccp
To display platform-dependent Web Cache Communication Protocol (WCCP) information, use the show
platform ip wccp privileged EXEC command.
show platform ip wccp {cache-engines | interfaces | service-groups} [switch switch-number]
Syntax Description
cache-engines
interfaces
service-groups
switch switch-number
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SECisco IOS XE 3.3SE
Usage Guidelines
Use this command only when you are working directly with a technical support representative while
troubleshooting a problem. Do not use this command unless a technical support representative asks you to do
so.
This command is available only if your device is running the IP Services feature set.
Examples The following example displays WCCP interfaces:
Device# show platform ip wccp interfaces
WCCP Interfaces
**** WCCP Interface Gi1/0/3 iif_id:0x104a60000000087 (#SG:1), vrf:0 Ingress
le_handle:0x565dd208 IPv4 Sw-Label:3, Asic-Label:3
* Service group id:0 type: Well-known
Open service
port[0]: 80
Related Commands
Command
ip wccp
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
528
Displays WCCP cache engines.
Displays WCCP interfaces.
Displays WCCP service groups.
(Optional) Displays WCCP information only for specified
switch-number.
prot: PROT_TCP l4_type: Dest ports
Description
enables web cache service
Modification
This command was introduced.
token:126 vrf:0 (ref count:1)
priority: 240