Mka Pre-Shared-Key - Cisco Catalyst 3650 series Command Reference Manual

mka pre-shared-key

To configure MKA MACsec on a device interface using a Pre Shared Key (PSK), use the mka pre-shared-key
key-chain key-chain name command in global configuration mode. To disable it, use the no form of this
command.
mka pre-shared-key key-chain key-chain-name
Syntax Description
mka pre-shared-key key-chain
Command Default
mka pre-shared-key is disabled.
Command Modes
Interface configuration
Command History
Release
Cisco IOS XE Denali 16.3.1
Usage Guidelines
Examples This example shows how to configure MKA MACsec on an interface using a PSK:
Switch#
Switch(config)# int G1/0/20
Switch(config-if)# mka pre-shared-key key-chain kc1
Switch(config-if)# end
Switch#
Enables MACsec MKA configuration on device interfaces using
a PSK.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
mka pre-shared-key
Modification
This command was introduced.
785