Show Policy-Map - Cisco Catalyst 3650 series Command Reference Manual

show policy-map

show policy-map
To display quality of service (QoS) policy maps, which define classification criteria for incoming traffic, use
the show policy-map command in EXEC mode.
show policy-map [policy-map-name| interface interface-id]
show policy-map interface {Auto-template | Capwap | GigabitEthernet | GroupVI | InternalInterface |
Loopback | Lspvif | Null | Port-channel | TenGigabitEthernet | Tunnel | Vlan | brief | class | input | output
show policy-map type control subscriber detail
Syntax Description
policy-map-name
interface interface-id
type control subscriber detail
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Cisco IOS XE 3.3SE
Usage Guidelines
Policy maps can include policers that specify the bandwidth limitations and the action to take if the limits are
exceeded.
Though visible in the command-line help string, the control-plane, session, and type keywords are not
Note
supported, and the statistics shown in the display should be ignored.
Examples
This is an example of the output for the show policy-map interface command.
Device# show policy-map interface gigabitethernet1/0/48GigabitEthernet1/0/48
Service-policy output: port_shape_parent
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
676
Class-map: class-default (match-any)
(Optional) Name of the policy-map.
(Optional) Displays the statistics and the configurations of the input
and output policies that are attached to the interface.
(Optional) Identifies the type of QoS policy and the statistics.
Modification
This command was introduced.
The interface interface-id keyword was added.