Command Reference, Cisco Ios Xe Everest 16.5.1A (Catalyst 3650 Switches - Cisco Catalyst 3650 series Command Reference Manual

• AutoQos-4.0-Output-Scavenger-Queue (match-any)
• AutoQos-4.0-Output-Multimedia-Strm-Queue (match-any)
The following policy maps and class maps are created and applied when running the auto qos video
media-player command:
Policy maps:
• AutoQos-4.0-Trust-Dscp-Input-Policy
• AutoQos-4.0-Output-Policy
Class maps:
• class-default (match-any)
• AutoQos-4.0-Output-Priority-Queue (match-any)
• AutoQos-4.0-Output-Control-Mgmt-Queue (match-any)
• AutoQos-4.0-Output-Multimedia-Conf-Queue (match-any)
• AutoQos-4.0-Output-Trans-Data-Queue (match-any)
• AutoQos-4.0-Output-Bulk-Data-Queue (match-any)
• AutoQos-4.0-Output-Scavenger-Queue (match-any)
• AutoQos-4.0-Output-Multimedia-Strm-Queue (match-any)
To disable auto-QoS on a port, use the no auto qos video interface configuration command. Only the
auto-QoS-generated interface configuration commands for this port are removed. If this is the last port on
which auto-QoS is enabled, and you enter the no auto qos video command, auto-QoS is considered disabled
even though the auto-QoS-generated global configuration commands remain (to avoid disrupting traffic on
other ports affected by the global configuration).
Table 32: Traffic Types, Packet Labels, and Queues
DSCP
10
CoS
CoS-to-egress
queue map
7 STP = Spanning Tree Protocol
8 BPDU = bridge protocol data unit
9 DSCP = Differentiated Services Code Point
10 CoS = class of service
VOIP Data VOIP
Traffic Control
Traffic
9
46 24, 26
5 3
4, 5 2, 3, 6, 7
(queue 1) (queue 2)

Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)

7 8
Routing STP BPDU
Protocol
Traffic
Traffic
48 56
6 7
2, 3, 6, 7 2, 3, 6, 7 (queue
(queue 2) 2)
auto qos video
Real-Time All Other Traffic
Video
Traffic
34 –
3 –
0 (queue 2 (queue 0, 1
3) 3) (queue
4)
617