Show Ip Pim Bsr - Cisco Catalyst 3650 series Command Reference Manual
Cisco ios xe everest 16.5.1a
Hide thumbs
Also See for Catalyst 3650 series:
- Hardware installation manual (126 pages) ,
- Configuration manual (94 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
show ip pim bsr
show ip pim bsr
To display information related to Protocol Independent Multicast (PIM) bootstrap router (BSR) protocol
processing, use the show ip pim bsr command in user EXEC or privileged EXEC mode.
show ip pim bsr
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Usage Guidelines
In addition to auto-rp, the BSR RP method can be configured. After the BSR RP method is configured, this
command will display the BSR router information.
Examples
The following is sample output from the show ip pim bsr command:
Device# show ip pim bsr
PIMv2 Bootstrap information
This system is the Bootstrap Router (BSR)
BSR address: 172.16.143.28
Uptime: 04:37:59, BSR Priority: 4, Hash mask length: 30
Next bootstrap message in 00:00:03 seconds
Next Cand_RP_advertisement in 00:00:03 seconds.
RP: 172.16.143.28(Ethernet0), Group acl: 6
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
262
Modification
This command was introduced.
Advertisement
Table of Contents
